Our washer is filling and agitating. It gets to where I think it should start draining but does not. It just stops. No humming noise. We were able to get it to drain but my husband wasn't sure how he did it. We tried a run through and it stopped again. Any help would be appreciated. Thanks kenmore 110. 80 series
Nov 05, 2014
★ ★ ★ ★ ☆
Product Troubleshooting for Washing Machines
Tips for a great answer:
- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
You might have a blocked hose pipe. Make sure it's all turned off. No water in pipe. Disconnect this. You may lose some water grab a bowl underneath then grab a wire coat hanger. Pull it out so it becomes like a huge rod, feed it all the way through (two people required one at each end) remove any blockage at chosen end. After Put some washing up liquid or sink and plug hole un blocker down there. Swish the cord up and down between you and your person holding. After a min or two Empty down sink. Rinse with clean water. Then Reconnect problem solved. My dad helped me with mine ;) hope this helped :)
Fix the pump on the machine it is under the machine on the bottom there is a tube or hose that comes off it that goes to drain