After a few minutes the washer would stop and F1flashing
What is the meaning of F1
★ ★ ★ ★ ☆
Product Troubleshooting for Cabrio WTW6600SBT Top Load Washer
Tips for a great answer:
- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
This is from a service bulletin. This may be of interest to you. There have been some problems with these machines in this area. CORRECTION:HE Top Load WashersModels:F1 Error CodeWTW6200S WTW6300S WTW6400S WTW6600S WTW6700TMTW6300T MTW6400T MTW6500T MTW6600T MTW6700TSerial Numbers: CT01 – CU52There are four areas of concern that can cause the F1 Error Code. Each area must be sequentially addressed to ensurethat the diagnosis is correct and the proper repair is completed.A) Air leaks in the air pressure (switch/sensor) hose.a. Inspect the hose for cracks, pin-holes or loose connection.b. Replace the hose and harness assembly (W10058730) if it is compromised.B) Moisture in the air pressure (switch/sensor) hose.a. Inspect the hose for evidence of water.b. Replace the hose and harness assembly (W10058730) if water is detected.C) Lint or flashing in the air dome hose connection port.a. Inspect the air dome hose connection port for lint or flashing.b. Use a small round device (small screwdriver) to ensure that there is nothing blocking the air dome outlet onthe tub.D) The control needs to be replaced.a. Replace the control only after you have completed steps A – C above, and verified that there are no issueswith the air pressure system.I would attempt to contact the manufacturer and see if any repair/parts costs will be covered. Some folks have said that they had some costs covered, while others have stated that they got no assistance from them, so I don't know what the outcome will be, but it is worth a try in my opinion. Really sorry for your trouble and I hope this helped. Best wishes.
Having problems with your Cabrio WTW6600SBT Top Load Washer ?