Kenmore

Kenmore

Our he3 elite keeps over filling and stops and beeps gives error message h & f

Posted by clbrackney on Jan 06, 2011

★ ★ ★ ★ ☆ 4.0 stars

Kenmore

Product Troubleshooting for Kenmore


Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Answers :


The pressure switch has not tripped 8 minutes after the water valves are turned on and the flow meter has detected about 10.5 gallons of water entering the machine. Either the pressure switch contact is stuck in the empty position or the pressure hose has air leaks or clogs causing the pressure switch not to trip.Disconnect power then remove the screws attaching the top panel to the rear of the machine then slide the panel rearwards and off the cabinet. Locate the pressure switch at the right side of the cabinet.Disconnect the pressure hose from the pressure switch then blow air down into the hose forcefully to clear it for clogs and check it for air leaks and kinks. Remove the pressure switch from the cabinet the do the same as for the pressure hose to possible free the stuck or welded contacts. replace the pressure hose if it has air leaks and/or the pressure switch itself if the contacts cannot be released.
Having problems with your Kenmore ?

Loading ...

Load time: 0.0074 seconds